Over Braided Flexible Conduit Connector

Delikon Shielding Termination Heavy Series Connector and Over Braided Flexible Conduit are designed to combat the effects of RFI EMI in cables
Industrial applications such as the factory floor are typically electrically noisy environments. Electrical noise, either radiated or conducted as electromagnetic interference EMI, can seriously disrupt the proper operation of other equipment. Cables can be a main source of transfer for EMI, both as a source and receiver. As a source, the cable can either conduct noise to other equipment or act as an antenna radiating noise. As a receiver, the cable can pick up EMI radiated from other sources. Switching heavy loads, inductive heaters, large transformers can all present high levels of both conducted and radiated EMI. Placing signal cables next to power cables can also allow power line noise to couple onto the signal lines.

Delikon Over Braided Flexible Conduit and Heavy Series Connector are designed to combat the effects of RFI EMI in cables. The over braiding of the conduit provides a low resistance path to ground and conducts to ground any of the noise it has picked up. Delikon Heavy Series Connector provides a shielding termination that provides a low impedance path to ground, ensuring high shielding effectiveness of the system. Delikon Heavy Series Connector makes sure the shields are bonded and grounded to equipment enclosure or electric cabinet. A 360-degree metal split clamp slip around the outer stainless braiding and the clamp is directly in contact with the shield when the connector back shell with a cone shape interior is tightened. The heavy series connector clamps tightly around the braiding and grounds the shielding, which helps to protect the cables against EMI noise.

Delikon Over Braided Flexible Conduit and Heavy Series Connector also protects a cable mechanically from scraps and abrasion and environmentally from dust, moisture and spills.

Over Braided Flexible Conduit Connector, Conduit Fittings for heavy series flexible sheath
( Straight Connector: YABS. 90 Degrees Connectors: YALS. 45 Degrees Connectors: YAHS)

All metal construction, heavy seriesConduit Fittings are most suitable for high temperature wirings.
Or with plastic sealing components for liquid tight applications. Metal clamping ring design provides positive shielding termination.
Most suitable for over braided flexible conduit and flexible metal conduit. Trade size: 1/4" - 6"
Available with G, ISO228-1, Metric, PF; NPT or PG threads. Male or Female Threads

Delikon Heavy Series Over Braided Flexible Conduit, Heavy Series Braided Conduit Fittings protect servo, feedback motor cables, PLC cables, control cables, instrumentation cables. Reducing or eliminating electromagnetic interference (EMI) for cables. Delikon heavy series over braided flexible conduit and connector are particularly recommended for protecting supply cables between frequency converters and servo motors.
For the wiring of machines and system controls, Delikon heavy series braided conduit connector provides High Pull-Out Resistance, Robust Performance, Long Life Expectancy, Fastest and Easy installation.

For use with braided flexible conduit systems: Positive clamping of both the inner conduit and braiding

Straight Heavy Series Flexible Conduit Fittings

Straight Connector (fixed type)
Model Size 0 degree
Heavy Series
Fixed Model Size

YABS-02B 1/4" YABS-20B 2"

YABS-03B 3/8" YABS-24B 2-1/2"

YABS-04B 1/2" YABS-30B 3"

YABS-06B 3/4" YABS-40B 4"

YABS-10B 1" YABS-50B 5"

YABS-12B 1-1/4" YABS-60B 6"

YABS-14B 1-1/2"

Straight Connector (swivel type)
Model Size 0 degree
Heavy Series
Swivel Model Size

YABSR-02B 1/4" YABSR-14B 1-1/2"

YABSR-03B 3/8" YABSR-20B 2"

YABSR-04B 1/2" YABSR-24B 2-1/2"

YABSR-06B 3/4" YABSR-30B 3"

YABSR-10B 1" YABSR-40B 4"

YABSR-12B 1-1/4"

The external thread swivels about the main body. It can be used with threaded entries or knockout secured with a locknut. Most suitable for installations requiring motion, vibration and bending. Delikon heavy series Swivel Connector protects data or power cables of electric motor,blower, pump,polishing machine, grinding machine, or any other applications where there is vibration

90 Degrees Heavy Series Conduit Fittings

90 Degrees Connector (fixed type)
Model Size 90 degrees
Heavy Series
Fixed Model Size

YALS-03B 3/8" YALS-14B 1-1/2"

YALS-04B 1/2" YALS-20B 2"

YALS-06B 3/4" YALS-24B 2-1/2"

YALS-10B 1" YALS-30B 3"

YALS-12B 1-1/4" YALS-40B 4"

90 Degrees Connector
(swivel type) Model Size 90 degrees
Heavy Series
Swivel Model Size

YALSR-03B 3/8" YALSR-14B 1-1/2"

YALSR-04B 1/2" YALSR-20B 2"

YALSR-06B 3/4" YALSR-24B 2-1/2"

YALSR-10B 1" YALSR-30B 3"

YALSR-12B 1-1/4" YALSR-40B 4"

The external thread swivels about the main body. It can be used with threaded entries or knockout secured with a locknut. Most suitable for installations requiring motion, vibration and bending.

Heavy Series Connectors are specially designed for heavy series over braided flexible conduit. These Heavy Series Conduit Fittings provide positive clamping on both the braiding and the inner conduit for heavy duty industry wiring applications.

Delikon Heavy Series Over Braided Flexible Conduit and Fittings are specially designed for protecting electric and automation cables from the harsh environments found in steel mills, coke plants and glass manufacturing.

45 Degrees Heavy Series Conduit Fittings

45 Degrees Connector (fixed type)
Model Size 45 degrees
Heavy Series
Fixed Model Size

YAHS-02B 1/4" YAHS-14B 1-1/2"

YAHS-03B 3/8" YAHS-20B 2"

YAHS-04B 1/2" YAHS-24B 2-1/2"

YAHS-06B 3/4" YAHS-30B 3"

YAHS-10B 1" YAHS-40B 4"

YAHS-12B 1-1/4"

45 Degrees Connector
(swivel type)
Model Size 45 degrees
Heavy Series
Swivel Model Size

YAHSR-02B 1/4" YAHSR-14B 1-1/2"

YAHSR-03B 3/8" YAHSR-20B 2"

YAHSR-04B 1/2" YAHSR-24B 2-1/2"

YAHSR-06B 3/4" YAHSR-30B 3"

YAHSR-10B 1" YAHSR-40B 4"

YAHSR-12B 1-1/4"

Connectors for flexible metallic conduit, for braided flexible conduit. All Heavy Series Flexible Conduit Metal Connectors are Available with G, ISO228-1, Metric, PF; NPT or PG threads. Male or Female threads.

Download the catalog page for DELIKON YABS, YALS, YAHS Heavy Series Conduit Connector for braided conduit in PDF File format. Also refer to Heavy Series Over Braided Flexile Conduit for industry cable management.

Heavy Series Flexible Conduit Fittings are most suitable for use with Over Braided Flexible Conduit for industrial cable management

DELIKON heavy series Over Braided Flexible Conduit conduit Fittings protect CNC machine cables

Delikon Heavy Series Over Braided Flexible Conduit and Over Braided Flexible Conduit Fittings are designed for aluminum smelting plant, aluminum processing plant and other metal industry power and control cable protection.

YF-705 SM-701 YF-704 SM70001

SC AT-SL-BRAIDED PBF WNS/ORC

       Most suitable For Industry Automation and Control Cables Management

Delikon heavy series over braided flexible conduit and heavy series braided conduit fittings protect electrical and control cables in Aluminum Smelting Plant, Aluminum Foundry, Aluminium Extrusion Plant, Aluminum Finishing Plant. Delikon heavy series over braided flexible conduit systems are also widely used in steel mills or other metal industry.

Delikon heavy series over braided flexible conduit systems are superior in their ability to withstand heat, moisture and molten material splash and are highly resistant to mechanical and physical abuse. The overall stainless steel braid provides slag protection.

Delikon EMI Shielding Heavy Series Over Braided Flexible Conduit System protects metal industry automation drive and control data and signal cables for high noise level locations of heavy processing plants such as steel mills and foundries. Delikon heavy series connector with metal clamping ring design provides positive shielding termination. Industrial applications such as the factory floor are typically electrically noisy environments. Electrical noise, either radiated or conducted as electromagnetic interference (EMI), can seriously disrupt the proper operation of equipments. The primary way to combat EMI in cables is through the use of shielding. Delikon heavy series over braided conduit system is providing additonal mechanical protection as well as EMI shielding to drive and control cables of intelligent industry automation to ensure a frictionless flow of data and material.

Delikon Heavy Series Over Braided Flexible Conduit and Fittings for steel industry automation cabling solution

Delikon Heavy Series Over Braided Flexible Conduit and Braided Conduit Fittings are designed for steel industry control panels wirings, PLC wirings, Motion Control wiring, power and data cable protection, both for hot and cold rolling mills and for others specific to the steel industry.

In both control cabinets and system cabling, the key factor in achieving high availability of your electronic and electrical system is secure and fail safe connection of all components. Therefore, you need Delikon as a reliable single-source partner who can deliver high quality electrical flexible conduit and fittings.

Our Heavy Series Over Braided Flexible Conduit and Fittings systems provide you with a future-proof answer to increasingly exacting plant and machinery cable protection requirements. Engineered to meet the needs of all industry sectors especially the steel industry in a virtually limitless range of tasks, the superiority of our over braided flexible conduit systems provides installation efficiency, flexibility, reliability and cost effectiveness - in every application.

Related Products of Flexible Conduits and Fittings for industry cable management

Delikon Pharmaceutical Industry
Cable Management System

Delikon is the leading manufacturer of complete Stainless Steel Flexible Conduit System. Our Stainless Steel Conduit System is popular with our customers:

Quick and easy to install.
Easy-to-clean.
Long life and durable.

Delikon Complete Stainless Steel Liquid Tight Conduit, Stainless Steel Liquid Tight Connector System for Food, Pharmaceutical, Brewing, Dairy and Soft Drinks industries

As the market leader for electrical flexible conduit system, Delikon is proud to be referred to as the leading manufacturer of Stainless Steel Cable Management Systems including Small Bore Stainless Steel Flexible Conduit, Stainless Steel Liquid Tight Conduit and Stainless Steel Liquid Tight Connector. All of our stainless steel products are ideally suited to the Food, Pharmaceutical, Brewing, Dairy and Soft Drinks industries, where hygienic, durable and corrosion-resistant solutions are required.

Delikon Aluminum Liquid Tight Connector, Metal Liquid Tight Conduit, The complete cable management solution for protection of carpet and textile industry intelligent automation electrical wiring
The textile industry is one of the most automated industries of all. Delikon Aluminum Liquid Tight Connector, Metal Liquid Tight Conduit offers a complete cable management solution for protection of carpet and textile industry electrical wiring. Aluminum Construction, Easy Field Installation, No Rust or Unsightly Discoloration, Protection for Vibration Environments, all these are the main benefits of choosing Delikon Aluminium Liquid Tight Connector for protecting the important drive and control electrical and data cales in intelligent automation applications.

Delikon also offers customly produced connectors for special electrical wiring applications.

Delikon G, ISO 228-1, PG, Metric, and NPT Thread Liquid Tight Insulated Connectors

Delikon G, ISO 228-1, PG, Metric Thread, and NPT Liquid Tight Insulated Connectors provide a reliable connection for liquid tight flexible metal conduit and PVC coated flexible metal conduit . The compact design results in a connector that could be installed in a tight space. Delikon liquid tight connectors are often found on power plant, railway station, and various other equipment, enclosures, junction boxes.

Heavy Serices Overbraided Flexible Steel Conduit System For High Temperature Wiring

Protective Stainless Steel OverBraided Flexible Metal Conduit for Industry Wiring

Braided Flexible Metal Conduit is widely used to counter mechanical stress and is highly flexible, and it is resistant against tensile stresses and transverse pressure.

This conduit also offers excellent protection to cables against hot metal particles, and immunity from electromagnetic interference. Most suitable for use in Hazardous Locations, industrial environments and high temperatures.

Over braided flexible conduit is particularly used in (mechanical) critical situations, such as machine-building, steel works but also in transport systems and security.


        For Industry Automation

Delikon Metals Industry Automation Wiring High Temperature Heavy Series Over Braided Flexible Metal Conduit and High Temperature Heavy Series Connector
Delikon is the leading supplier of High Temperature Heavy Series Over Braided Flexible Metal Conduit and High Temperature Heavy Series Connector for protection of electrics and automation cables for the metals industry. Steel plants, especially rolling mills as well as processing lines, depend mainly on uninterruptible processes and on the quality of the steel rolled. As a result, cable protection technology plays an essential role. Delikon High Temperature Heavy Series Over Braided Flexible Metal Conduit and High Temperature Heavy Series Connector constructed entirely of metals, are ideally suited for foundries, glass manufacturing, steel mills and other high temperature processes, providing a cable flexible conduit system for longer life and reduced down time. Delikon High Temperature Heavy Series Over Braided Flexible Metal Conduit and High Temperature Heavy Series Connector offer mechanical impact and crushing protection as well as protection against hot sparks and slag.
In addition to the benefit of protection against damage to cable components from cable motion and use, proper shielding provided by Delikon High Temperature Heavy Series Over Braided Flexible Metal Conduit and High Temperature Heavy Series Connector is essential to many applications as it can keep out unwanted external interference. In many applications, electromagnetic interference EMI is a threat to signal integrity. Shield quality is of particular importance in small signal or high frequency applications where a slight variation can have significant impact. All electrical cable will radiate energy to, and pick up energy from, its surroundings. As such, shielding of Delikon flexible conduit system can also be used to contain the electromagnetic energy radiated by a cable, which in turn can protect nearby sensitive components.